Professional Oil Extraction Process Craft Introduction

Oil Extraction Process method is using solvent naphtha (6) extract oil raw material after fully immersed in the high temperature (260 degrees), through the six process(Degreasing, degumming, dewatering, decoloring, deodorization, deacidification) and finally producing edible oil....

Oil Extraction Process method is using solvent naphtha (6) extract oil raw material after fully immersed in the high temperature (260 degrees), through the six process(Degreasing, degumming, dewatering, decoloring, deodorization, deacidification) and finally producing edible oil. Oil Extraction Equipment characteristics are: High oil yield, low production cost, lower price than traditional pressing method.
The original natural vegetable oil is lost during excessive refining process, and fat-soluble vitamins will be destroyed, remaining light gasoline trace "6". The new national standard regulations, soak well pull oil solvent residue standard secondary shall not exceed 10 milligrams per kilogram, three level 4 do not allow more than 50 mg. What’s more, Cans of oil must mark on the label of pressing or leaching, and consumers have right to know. Consumers choose the edible oil freely.

Comparing with the old traditional oil pressing method, Oil Extraction method conform relevant national standard. With the property of the oil and the selected solvents miscibility, treated by solvent and the extraction of solid fuel oil contact dissolved out, and with strict process remove the solvent in oil. Compared with traditional oil pressing method, residual oil rate in the oil cake is low; high oil yield; low cost processing, low labor intensity, good work environment, good oil cake quality; oil resources has been made full use of.

Crude oil can’t eat, no matter extraction method or pressing method. Crude Oil contains a variety of impurities, including the raw materials or oil extraction process. Some impurity is extremely harmful to the human body (such as the gossypol cottonseed oil). After further processing (oil refining), remove impurities, becoming edible oil products. Crushing and extraction only makes crude oil. And make the crude oil into refined oil products, oil refining is necessary.